Martin Ukulele Pre 1930 Repairs

The martin ukulele repairs are ongoing

The number "39" is handwritten in pencil on the tail block.

Measurements for future reference

Inside of the ukulele

Top being glued back on

Vega Style Tenor Banjo

 Banjo cleaned up well.

Added new skin head, bridge and strings.

All brackets, nuts, and tone ring are original

Original tuners are a little rusty, but work well

Ebony headstock veneer and fretboard

 Vintage Waverly tailpiece

Maple pot with no name or markings

New frets were installed.

Today's Update

 Rosewood back getting glued together

 

Ukulele getting patched back together, had more cracks then first realized

Neck joint exposed, has two shims

Gibson L-48 Update

Finished the side repair and strung up ready to play. Not a perfect repair but did not affect tone, sounds great!

Guitar Build

Well, I have finally started my first attempt at actually building a guitar from scratch. The sides are planed down and bent and the back and top are ready to be glued up.

Gibson L-48 Update

Here are some recent photos of the work on the L-48 with the busted side. It has been patched back together the best that I could with what there was left to work with. Some cream binding was installed and stained with amber dye to match the existing yellowed binding on the rest of the piece. I am still working on the color match on the side, but may have to resign myself that it may never be a great match.

Martin Ukukele

This is a Martin O Type Ukulele. I believe it to be dated pre-1930 since it has no front headstock sticker and is stamped on the back of the peg head with the Martin logo. It also has the Martin logo stamped inside the body on the back above the middle brace.

It is in pretty good shape, a little beaten up, with a few cracks and a split at the lower bout side to top connection. The finish appears that someone has done some touch up, although not a very good job.

The body is mahogany, and there is no body binding on this model. There is a black/white/black/white sound hole rosette. The fretboard and the bridge appear to be rosewood. There are 12 frets on the fingerboard. The body dimensions are 9-3/8" long, 6-3/8" at the lower bout, 4" at the waist, and 5" at the upper bout. The neck length from body to tip of headstock is 11-1/4". The neck width at the nut is 1-3/8", and 1-7/8" at the body joint.

The tuning pegs are friction type. I have taken one of them apart to show what they look like. I could not find much reference to these type of tuners on line, so I am providing this photo.

There is a small spring inside the body. The shaft is square, and the unit pulls apart once the top screw is removed. Tension is increased by tightening the screw once it is installed.

This piece will need some major reconstruction items to get it playing. The neck is loose, so it will probably come off  and be reset. After the neck is off the top will be removed in order to do the necessary body repairs. A refinish is probably in order to try and fix the previous job.